OEM Part NO. 7J-0858 / 7J0858 MOLDBOARD ASSEM.

Product Name: 7J0858MOLDBOARD ASSEM.

Category: Bucket

Model: D7G2 Track Type Tractor

Section: Work Tools

Group: D7G2 TRACK-TYPE TRACTOR, Powered By 3306 Engine

Note: 7J-0858 MOLDBOARD AS -STRAIGHT BLADE S/N C7G1000-UP; S7G1-UPPART OF 6J-5375 BLADE GP-STRAIGHT AN ATTACHMENT

Get a Quote

Description

Product Name: 7J0858MOLDBOARD ASSEM.

Category: Bucket

Remark: 7J-0858 MOLDBOARD AS -STRAIGHT BLADE S/N C7G1000-UP; S7G1-UPPART OF 6J-5375 BLADE GP-STRAIGHT AN ATTACHMENT

Model: D7G2 Track Type Tractor

Section: Array

Group: D7G2 TRACK-TYPE TRACTOR, Powered By 3306 Engine

Is service: Y

CCR: N

Is Filter: N

Is Maint: N

NPR: Y

IE type: I

Is arrangement: N

Is change: N

IE Modifer: -STRAIGHT BLADE

SEQPart NO.NamePos.Qty.NPRCCRServiceChangeTypeModifer

12B7561OEM Part NO. 2B-7561 / 2B7561 CORK (NO. 8)- / -8YYY--CORK-- COMPRESSION RELEASE SHAFT HOLE
26J6229OEM Part NO. 6J-6229 / 6J6229 PIN- / -2YNY---
36J5342OEM Part NO. 6J-5342 / 6J5342 RETAINER- / -2YNY---
45J5643OEM Part NO. 5J-5643 / 5J5643 CONNECTOR- / -2YNY---
56J5310OEM Part NO. 6J-5310 / 6J5310 BRACKET- / -2YNY---
66J5340OEM Part NO. 6J-5340 / 6J5340 CUTTING EDGE (End .75" Thick)- / -2YNY---
77J5181OEM Part NO. 7J-5181 / 7J5181 BRACKET ASSEM.- / -2YNY---
87J5131OEM Part NO. 7J-5131 / 7J5131 TRUNNION- / -1YNY---
97J2363OEM Part NO. 7J-2363 / 7J2363 CUTTING EDGE (Center .75" Th.)- / -1YNY---
107J1786OEM Part NO. 7J-1786 / 7J1786 BRACKET ASSEM.- / -1YNY---
116F0196OEM Part NO. 6F-0196 / 6F0196 BOLT (2.75" LONG)- / -31YYY--7/8-9X2.75-IN
126J9164OEM Part NO. 6J-9164 / 6J9164 HITCH BRACKET GROUP- / -1YNY---
134J3699OEM Part NO. 4J-3699 / 4J3699 PLATE (To Provide Push Plate)- / -1YNYNI-
147J8765OEM Part NO. 7J-8765 / 7J8765 DEFLECTOR ASSEM.- / -2YNY---
155J6010OEM Part NO. 5J-6010 / 5J6010 PLATE- / -2YNY---
167J8776OEM Part NO. 7J-8776 / 7J8776 REINFORCEMENT- / -2YNY---
179J6824OEM Part NO. 9J-6824 / 9J6824 TRUNNION ASSEM.- / -2YNY---
189J6058OEM Part NO. 9J-6058 / 9J6058 DEFLECTOR ASSEM.- / -2YNY---
196J5375OEM Part NO. 6J-5375 / 6J5375 BLADE GP-STRAIGHT- / -1YNYNI-
203J2454OEM Part NO. 3J-2454 / 3J2454 RETAINER- / -1YNY---
219J5962OEM Part NO. 9J-5962 / 9J5962 TRUNNION ASSEM.- / -2YNY---
223G8274OEM Part NO. 3G-8274 / 3G8274 BRACKET ASSEM.- / -1YNY---
235J4772OEM Part NO. 5J-4772 / 5J4772 BOLT (Plow)- / -31YYY---
245J9627OEM Part NO. 5J-9627 / 5J9627 END BIT (R.H. .875" Thick)- / -1YYY--R.H.
255J9628OEM Part NO. 5J-9628 / 5J9628 END BIT (L.H. .875" Thick)- / -1YNY--L.H.
263J3142OEM Part NO. 3J-3142 / 3J3142 WEAR PLATE- / -3YNY---
276D5314OEM Part NO. 6D-5314 / 6D5314 SHOE ASSEM.- / -1NNY---
285J6927OEM Part NO. 5J-6927 / 5J6927 END BIT (R.H. Standard Flat)- / -1YYY---
291A0458OEM Part NO. 1A-0458 / 1A0458 BOLT 1.75 in. (44.45 mm) long- / -4YNY--3/4-10X1.75-IN
309H1031OEM Part NO. 9H-1031 / 9H1031 WASHER 5.95 mm(.234 in.) thick- / -31YNY--24X41.5X6-MM THK
318M3494OEM Part NO. 8M-3494 / 8M3494 PLATE- SERIAL NUMBER- ON RIPPER CARRIAGE- / -1YNY--SERIAL NO. PLATE
324B4159OEM Part NO. 4B-4159 / 4B4159 SCREW --PLATE TO DASH SIDE- / -4YYY--DRIVE SCREW
332J3505OEM Part NO. 2J-3505 / 2J3505 NUT (Full)- / -31YNY--7/8-9-THD
343B8488OEM Part NO. 3B-8488 / 3B8488 GREASE NIPPLE (90 DEGREES)- / -2YYY--1/8-27 PTF
355J8767OEM Part NO. 5J-8767 / 5J8767 END BIT (R.H. 1.125" Thick)- / -1YNY--END BIT R.H.
365J8768OEM Part NO. 5J-8768 / 5J8768 END BIT (L.H. 1.125" Thick)- / -1YNY--END BIT L.H.
374J8843OEM Part NO. 4J-8843 / 4J8843 END BIT (R.H. - 1.125" Thick)- / -1YNY--END BIT R.H.
384J8844OEM Part NO. 4J-8844 / 4J8844 END BIT (L.H. - 1.125" Thick)- / -1YNY--END BIT L.H.
397J2846OEM Part NO. 7J-2846 / 7J2846 CUTTING EDGE GROUP IS AVAILABLE- / -1YNYNL-
407J2847OEM Part NO. 7J-2847 / 7J2847 CUTTING EDGE (End .984" Thick)- / -2YNY--CUTTING EDGE END .984" THICK
417J9481OEM Part NO. 7J-9481 / 7J9481 CUTTING EDGE (Center .984" Th.)- / -1YNY--CUTTING EDGE CENTER .984" THICK
423B4512OEM Part NO. 3B-4512 / 3B4512 LOCKWASHER (3/4") TRANSFER GEAR CASE TO FRAME MOUNTING- / -4YYY--LOCKWASHER
435J6928OEM Part NO. 5J-6928 / 5J6928 END BIT (L.H. Standard Flat)- / -1YYY---
447J0858OEM Part NO. 7J-0858 / 7J0858 MOLDBOARD ASSEM.- / -1YNYNI-
456J5335OEM Part NO. 6J-5335 / 6J5335 PLATE ASSEM. (R. H.)- / -1YNY--RH
466J5313OEM Part NO. 6J-5313 / 6J5313 SHOE ASSEM. (R. H.)- / -1YNY---
475J6351OEM Part NO. 5J-6351 / 5J6351 END BIT (upper)- / -1YNY---
487J6352OEM Part NO. 7J-6352 / 7J6352 BIT (Router)- / -1NNY---
496J5336OEM Part NO. 6J-5336 / 6J5336 PLATE ASSEM. (L. H.)- / -1YNY--LH
506J5314OEM Part NO. 6J-5314 / 6J5314 SHOE ASSEM. (L. H.)- / -1YNY---
515J6352OEM Part NO. 5J-6352 / 5J6352 END BIT (lower)- / -1YNY---
526J5387OEM Part NO. 6J-5387 / 6J5387 BRACKET ASSEM. (Right Hand)- / -1YNY--R.H.
533J2452OEM Part NO. 3J-2452 / 3J2452 CAP-BALL JOINT- / -1YNY---
546J5388OEM Part NO. 6J-5388 / 6J5388 BRACKET ASSEM. (Left Hand)- / -1YNY--L.H.

Part NO. 7J0858 suitable for:

SEQPart NO.NamePos.Qty.NPRCCRServiceChangeTypeModifer

16J5376OEM Part NO. 6J-5376 / 6J5376 BLADE GP- / -1YNYNIBLADE GROUP
26J5375OEM Part NO. 6J-5375 / 6J5375 BLADE GP-STRAIGHT- / -1YNYNI-

Phone:
Email:

Products

Fit for Caterpillar | For Hitachi | For Volvo | For Doosan
Controller | Hydraulic
Excavator Parts
Hydraulic Unit
Diesel Engine

Parts EPC

HOW CAN WE HELP

(Any references to trademarks, names, descriptions, numbers, and symbols on our website are utilized for reference purposes only. All trademarks pertaining to original equipment manufacturers are duly registered trademarks of the respective original equipment manufacturers. Our website explicitly disclaims any direct association or affiliation with the manufacturers listed. The use of manufacturers' names and descriptions is strictly for reference purposes and does not imply any endorsement or sponsorship.)