OEM Part NO. 153-3747 / 1533747 CYLINDER GP-FORK

Tonkee OEM excavator parts

HOME Project Case Privacy Payment Shipping FAQ SITEMAP

HOME Products Parts EPC BAUMA Exhibition Bussiness Recruiting Distributor About us Blog Contact us

OEM Part NO. 153-3747 / 1533747 CYLINDER GP-FORK

Product Name: 1533747CYLINDER GP-FORK

Category: Hydraulic System

Model: 950G Wheel Loader

Section: Hydraulic System

Group: 962G II Wheel Loader, Powered By 3126B Engine

Note: 153-3747 CYLINDER GP-FORK S/N AXS1-UP 127-MM (5-IN) BORE X 473-MM (18.6-IN) STROKE PART OF 157-3466 FORK GP-LOG

Get a Quote

Description

Product Name: 1533747CYLINDER GP-FORK

Category: Hydraulic System

Remark: 153-3747 CYLINDER GP-FORK S/N AXS1-UP 127-MM (5-IN) BORE X 473-MM (18.6-IN) STROKE PART OF 157-3466 FORK GP-LOG

Model: 950G Wheel Loader | 950G Wheel Loader | 950G Wheel Loader | 950G Wheel Loader | 950G Wheel Loader | 950G Wheel Loader | 950G Wheel Loader | 950G Wheel Loader | 950G Wheel Loader

Section: Array

Group: 962G II Wheel Loader, Powered By 3126B Engine

Is service: Y

CCR: N

Is Filter: N

Is Maint: N

NPR: Y

IE type: I

Is arrangement: N

Is change: N

IE Modifer: -LOGGING

Part Modifer: (LOGGING FORK)

SEQPart NO.NamePos.Qty.NPRCCRServiceChangeTypeModifer

11698238OEM Part NO. 169-8238 / 1698238 PIN AS- / -2YNY---
27G3834OEM Part NO. 7G-3834 / 7G3834 CLIP (slotted)- / -4YNY--SLOT
36V9854OEM Part NO. 6V-9854 / 6V9854 ELBOW-90 DEG ORFS- / -2YNY--SWIVEL
47X0332OEM Part NO. 7X-0332 / 7X0332 BOLT (1/2 - 13 X 4.50IN)- / -2YNY--1/2-13X4.5-IN
53E7443OEM Part NO. 3E-7443 / 3E7443 TEE-UNION O-RING FACE SEAL- / -2YNY--SPL
62V1195OEM Part NO. 2V-1195 / 2V1195 SPACER-SPECIAL- / -4YYY---
71773034OEM Part NO. 177-3034 / 1773034 HOSE AS- / -1YYY---
81533742OEM Part NO. 153-3742 / 1533742 TIP-WEAR- / -2YYY---
91533743OEM Part NO. 153-3743 / 1533743 PIN-RETAINER- / -4YNY---
101533744OEM Part NO. 153-3744 / 1533744 RING-RETAINING- / -4YYY---
112032208OEM Part NO. 203-2208 / 2032208 CYLINDER GP-FORK- / -2YNYNIFORK
121533750OEM Part NO. 153-3750 / 1533750 PIN-PIVOT- / -2YNY---
131609881OEM Part NO. 160-9881 / 1609881 PIN AS- / -2YNY---
147G3833OEM Part NO. 7G-3833 / 7G3833 DOUBLE CLAMP- / -4YNY--TAB
158K2360OEM Part NO. 8K-2360 / 8K2360 BUSHING- / -4YYY---
161533747OEM Part NO. 153-3747 / 1533747 CYLINDER GP-FORK- / -2YNYNILOGGING FORK
174K6543OEM Part NO. 4K-6543 / 4K6543 PLATE (Nominal)- / -2YNY---
181593646OEM Part NO. 159-3646 / 1593646 FRAME GP-FORK- / -1NNNNI-
191597211OEM Part NO. 159-7211 / 1597211 HOSE AS- / -2YYY---
201746457OEM Part NO. 174-6457 / 1746457 CLAMP AS- / -1YNY---
211773032OEM Part NO. 177-3032 / 1773032 HOSE AS- / -1YYY---
221773033OEM Part NO. 177-3033 / 1773033 HOSE AS- / -1YYY---
231773035OEM Part NO. 177-3035 / 1773035 HOSE AS- / -1YYY---
241876238OEM Part NO. 187-6238 / 1876238 HOSE AS- / -1YYY---
251876239OEM Part NO. 187-6239 / 1876239 HOSE AS- / -1YYY---
268T4184OEM Part NO. 8T-4184 / 8T4184 BOLT (M12X1.75X45MM)- / -1YNY--M12X1.75X45MM
278T4223OEM Part NO. 8T-4223 / 8T4223 WASHER-HARD-25.5MM OD X 13.5MM ID X 3MM- / -18YYY--3MM THK
288T4244OEM Part NO. 8T-4244 / 8T4244 NUT (M12X1.75 THD)- / -6YNY--M12X1.75 THD
298T4133OEM Part NO. 8T-4133 / 8T4133 NUT-ELBOW TO MANIFOLD- / -8YNY--M10X1.50 THD
308T4121OEM Part NO. 8T-4121 / 8T4121 WASHER-HARD (21.0 MM OD)- / -16YYY--2.5MM THK
318T4139OEM Part NO. 8T-4139 / 8T4139 BOLT (M12 X 1.75 X 30 MM)- / -12YNY--M12X1.75X30MM
325P1076OEM Part NO. 5P-1076 / 5P1076 WASHER guard to support assembly and guard assembly- / -9YNY--4MM THK
338T4192OEM Part NO. 8T-4192 / 8T4192 BOLT (M12 X 1.75 X 25 MM)- / -9YNY--M12X1.75X25MM
343B8489OEM Part NO. 3B-8489 / 3B8489 LUBE FITTING, 1/8" N.P.T. str.- / -6YYY--1/8-27 THD
354J0520OEM Part NO. 4J-0520 / 4J0520 SEAL (FOR TILT PORTS ON VALVE)- / -4YYY--32.92MM ID
365K9090OEM Part NO. 5K-9090 / 5K9090 SEAL-TO HYDRAULIC COOLER INLET PORT- / -4YYY--23.52MM ID
378T4194OEM Part NO. 8T-4194 / 8T4194 BOLT (M12X1.75X50MM)- / -4YNY--M12X1.75X50MM
383D2824OEM Part NO. 3D-2824 / 3D2824 SEAL 3V8844 ELBOW- / -4YYY--23.47MM ID
398T6466OEM Part NO. 8T-6466 / 8T6466 BOLT (M10X1.50X60MM)- / -4YNY--M10X1.50X60MM
406V9746OEM Part NO. 6V-9746 / 6V9746 SEAL - O - RING (18.94MM ID)- / -8YYY--18.94MM ID
411K6872OEM Part NO. 1K-6872 / 1K6872 LOCKNUT HORN TO GUARD- / -2YYY--1/2-13-THD
421P4577OEM Part NO. 1P-4577 / 1P4577 FLANGE-HALF (FOR TILT PORTS ON VALVE)- / -8YNY--FLANGE
438T5005OEM Part NO. 8T-5005 / 8T5005 BOLT (M10 X 1.5) X (70 MM)LG- / -4YNY--M10X1.5X70-MM
445P8444OEM Part NO. 5P-8444 / 5P8444 GROMMET (37mm I/D)- / -6YYY--37-MM ID
456V9007OEM Part NO. 6V-9007 / 6V9007 ELBOW (90 DEGREES 1-1/16)- / -4YNY--90 DEGREE-1-1/16-12THD
465P7468OEM Part NO. 5P-7468 / 5P7468 CLIP (SLOT - SMALL)- / -6YNY--SLOT
475P7469OEM Part NO. 5P-7469 / 5P7469 CLIP (TAB - SMALL)- / -6YNY--TAB
487G3832OEM Part NO. 7G-3832 / 7G3832 GROMMET TWIN- / -4YYY--1/2-13
497K9209OEM Part NO. 7K-9209 / 7K9209 SEAL-LIP TYPE- / -4YYY--76.20MM ID

Part NO. 1533747 suitable for:

SEQPart NO.NamePos.Qty.NPRCCRServiceChangeTypeModifer

11573466OEM Part NO. 157-3466 / 1573466 FORK GP-LOG- / -2---YI-
21668578OEM Part NO. 166-8578 / 1668578 FORK GP-LOG & LUMBER- / -2---YI-
31192302OEM Part NO. 119-2302 / 1192302 FORK GP-GRAPPLE- / -3YNNNILOGGING

TONKEE PARTS

Phone:
Email:

Products

Fit for Caterpillar | For Hitachi | For Volvo | For Doosan
Controller | Hydraulic
Excavator Parts
Hydraulic Unit
Diesel Engine

Machine Arrangement

Electric System

Steering System

HOW CAN WE HELP

(Any references to trademarks, names, descriptions, numbers, and symbols on our website are utilized for reference purposes only. All trademarks pertaining to original equipment manufacturers are duly registered trademarks of the respective original equipment manufacturers. Our website explicitly disclaims any direct association or affiliation with the manufacturers listed. The use of manufacturers' names and descriptions is strictly for reference purposes and does not imply any endorsement or sponsorship.)