OEM Part NO. 185-0148 / 1850148 PUMP GP-GEAR

Product Name: 1850148PUMP GP-GEAR

Category: Final Drive

Model: AD55 Underground Art Truck

Section: Power Train

Group: AD60 Underground Articulated Truck, Powered By C27 Engine

Note: 185-0148 PUMP GP-GEAR S/N NNW1-UPPART OF 385-9850 LINES GP-SCAVENGE

Get a Quote

Description

Product Name: 1850148PUMP GP-GEAR

Category: Final Drive

Remark: 185-0148 PUMP GP-GEAR S/N NNW1-UPPART OF 385-9850 LINES GP-SCAVENGE

Model: AD55 Underground Art Truck | AD55 Underground Art Truck | AD55 Underground Art Truck | AD55 Underground Art Truck

Section: Array

Group: AD60 Underground Articulated Truck, Powered By C27 Engine

Is service: Y

CCR: N

Is Filter: N

Is Maint: N

NPR: Y

IE type: I

Is arrangement: N

Is change: N

Part Modifer: (2-SECTION)

SEQPart NO.NamePos.Qty.NPRCCRServiceChangeTypeModifer

15P8444OEM Part NO. 5P-8444 / 5P8444 GROMMET (37mm I/D)- / -2YYY--37-MM ID
22110424OEM Part NO. 211-0424 / 2110424 MOUNT- / -1YNY---
32110423OEM Part NO. 211-0423 / 2110423 TUBE AS- / -1YNY---
42110422OEM Part NO. 211-0422 / 2110422 HOSE AS- / -1YYY---
51850148OEM Part NO. 185-0148 / 1850148 PUMP GP-GEAR- / -1YNNNI2-SECTION
67X0310OEM Part NO. 7X-0310 / 7X0310 BOLT (L=51mm)- / -4YNY--7/16-14X2IN
71731437OEM Part NO. 173-1437 / 1731437 FLANGE-HALF- / -4YNY---
87S0575OEM Part NO. 7S-0575 / 7S0575 STEM ASSEM. ( 90 DEGREES )- / -1YNY--90 DEG
99X6380OEM Part NO. 9X-6380 / 9X6380 BOLT- / -2YNY--5/8-11X1.5-IN
106V0397OEM Part NO. 6V-0397 / 6V0397 FLANGE (HALF)- / -4YNY---
115P7469OEM Part NO. 5P-7469 / 5P7469 CLIP (TAB - SMALL)- / -2YNY--TAB
125P7468OEM Part NO. 5P-7468 / 5P7468 CLIP (SLOT - SMALL)- / -2YNY--SLOT
138T4223OEM Part NO. 8T-4223 / 8T4223 WASHER-HARD-25.5MM OD X 13.5MM ID X 3MM- / -10YYY--3MM THK
148T5360OEM Part NO. 8T-5360 / 8T5360 WASHER-HARD (22.5MM OD)- / -4YYY--12X22.5X2.5-MM THK
157S0570OEM Part NO. 7S-0570 / 7S0570 STEM ASSEM.--(straight)- / -1YNY--STRAIGHT
163S7252OEM Part NO. 3S-7252 / 3S7252 SLEEVE- / -2YNY--SLEEVE
175P0181OEM Part NO. 5P-0181 / 5P0181 HOSE (Angle Orientation 0 Degrees) 104cm- / -1YYY--87.8cm
184J0522OEM Part NO. 4J-0522 / 4J0522 SEAL-INTERFACE BETWEEN 3RD & TILT VALVE- / -3YYY--37.69MM ID
198T4122OEM Part NO. 8T-4122 / 8T4122 WASHER-HARD-32MM OD X17MM ID X 3.5MM- / -2YNY--3.5MM THK
205P1076OEM Part NO. 5P-1076 / 5P1076 WASHER guard to support assembly and guard assembly- / -1YNY--4MM THK
218T4183OEM Part NO. 8T-4183 / 8T4183 BOLT (M12X1.75X40MM)- / -9YNY--M12X1.75X40MM
228T4139OEM Part NO. 8T-4139 / 8T4139 BOLT (M12 X 1.75 X 30 MM)- / -1YNY--M12X1.75X30MM
238T4244OEM Part NO. 8T-4244 / 8T4244 NUT (M12X1.75 THD)- / -1YNY--M12X1.75 THD

Part NO. 1850148 suitable for:

SEQPart NO.NamePos.Qty.NPRCCRServiceChangeTypeModifer

12063915OEM Part NO. 206-3915 / 2063915 LINES GP-SCAVENGE- / -1YNNNI-
23046329LINES GP-SCAVENGE- / -1YNNNI-
33859850LINES GP-SCAVENGE- / -1YNNNI-

Phone:
Email:

Products

Fit for Caterpillar | For Hitachi | For Volvo | For Doosan
Controller | Hydraulic
Excavator Parts
Hydraulic Unit
Diesel Engine

Parts EPC

HOW CAN WE HELP

(Any references to trademarks, names, descriptions, numbers, and symbols on our website are utilized for reference purposes only. All trademarks pertaining to original equipment manufacturers are duly registered trademarks of the respective original equipment manufacturers. Our website explicitly disclaims any direct association or affiliation with the manufacturers listed. The use of manufacturers' names and descriptions is strictly for reference purposes and does not imply any endorsement or sponsorship.)